GR29 UNDERWATER GRINDER CE W/COUPLERS
The Stanley GR29 is a right angle sharpener that can be used for roughing and cleaning in underwater applications with a variety of discs, brushes and accessories
The Stanley GR29 is a right angle sharpener that can be used for roughing and cleaning in underwater applications with a variety of discs, brushes and accessories
The Stanley SK58 drill is a heavy duty drill, designed for underwater operations in concrete, rock and masonry drilling.The SK58 uses industry standard drilling steels and can drill up to 6m depth. The direct motor drive drives the rotation on the 1 "x 4 1/4" hex shank of the drill steel, the rotation It can be set between 0 and 300 RPM.
The feathering on / off valve and adjustable rotation speed allows easy drill bit start-up and precise control. The high torque rotation motor drives standard 736 Skil hex carbide tipped drill bits and is capable of drilling a 2 "diameter hole up to 29" deep.
The Stanley DL07 Series drill has a 1/2-inch capacity for drilling into wood, metal, or masonry.
Stanley hydraulic impact wrenches for subsea applications are designed to meet the most stringent subsea screwdriving requirements. Their rugged design includes an integrated motor and a rugged mechanism for the tough demands of railroad maintenance. The power-to-weight ratio of this equipment has no comparison with an impact wrench of this type on the market.
Stanley hydraulic impact wrenches for underwater applications are designed for the most demanding requirements of underwater screwing. The rugged design incorporates an integrated motor and rugged mechanism for severe railroad maintenance requirements. The power to weight ratio of this equipment has no comparison with an impact wrench of this type on the market.
Stanley hydraulic impact wrenches for underwater applications are designed for the most demanding requirements of underwater screwing. The rugged design incorporates an integrated motor and rugged mechanism for severe railroad maintenance requirements. The power to weight ratio of this equipment has no comparison with an impact wrench of this type on the market.
The ID07 is a high torque impact wrench used for tightening and loosening nuts and screwing lag bolts. It applies impact torque up to 500 ft-lb /675 Nm. Available with friction ring or bolt type retaining socket.
The ID07 is a high torque impact wrench used to adjust and loosen nuts and bolts. Apply a maximum impact torque of 675 Nm. Available with friction ring or bolt retainer sleeve.
Stanley hydraulic impact wrenches for underwater applications are designed to meet the most stringent requirements for underwater screwing. Their rugged design includes an integrated motor and a rugged mechanism for the tough demands of railroad maintenance. The weight ratio -The power of this equipment has no comparison with an impact wrench of this type on the market.
The SM20 submersible pump is self-priming and can run dry without damage. It has the capacity to pump 250 gpm (946 lpm) and move solids up to 8 mm in diameter, making it an extremely powerful and reliable pump.
Stanley hydraulic pumps exemplify the sheer power of hydraulic tools. Our SM50 pump releases no less than 500 gallons per minute (1890 bpm) and its small size allows it to fit into an 11 inch deep by 10 inch square (26.7 cm x 25.4 cm) box.
Stanley hydraulic pumps exemplify the sheer power of hydraulic tools. Our SM50 pump discharges no less than 500 gallons per minute (1890 lpm) and its small size allows it to fit into a box 11 inches deep by 10 inches square (26.7 cm x 25.4 cm).
The TP03 and TP08 waste pump lines are a good example of the hydraulic power used to pump liquids containing solids. The TP03 pump provides a discharge capacity of 450 gallons per minute (1688 l / min) and can pump solids up to a diameter of 76 mm (3 in).
The TP03 and TP08 waste pump lines are a good example of the hydraulic power used to pump liquids containing solids. The TP08 has a discharge capacity of 800 gpm (3028 lpm) and can pump solids up to 4 inches (102 mm) in diameter.